External Audio Sources; Front Aux-In Socket; Sound Settings; Calling And Exiting The "Audio" Menu - Blaupunkt Professional Bedienungs- Und Einbauanleitung

Note:
If no device is paired, "NO DEVICE" is briefl y
displayed.
u Press the
/ button
times to select another device.
u Press the
button
following options:
To connect the selected device,
u press the
/ button
the "CONNECT DEVICE ..." menu item is se-
lected.
u Press the
button
As soon as the device is connected, "CON-
NECTED" is briefl y displayed and you are re-
turned to the Bluetooth® menu.
Note:
If no connection can be established, the
display briefl y shows "CONNECT FAILED". If
the device is already connected, the display
briefl y shows "CONNECTED".
To disconnect the connection to the selected de-
vice,
u press the
/ button
the "DISCONNECT DEVICE ..." menu item is
selected.
u Press the
button
vice.
The display briefl y shows "DISCONNECTED"
and you are returned to the Bluetooth® menu.
To unpair the selected device,
u press the
/ button
the "DELETE DEVICE ..." menu item is selected.
u Press the
button
The display briefl y shows "DELETED" and you
are returned to the Bluetooth® menu.
Unpairing all paired devices
u In the Bluetooth® menu, select the "DELETE
ALL PAIRED DEVICES" menu item.
u Press the
button
phones or streaming devices.
The display briefl y shows "ALL DEVICES
DELETED".
7
once or several
7
to select between the
7
repeatedly until
7
to connect the device.
7
repeatedly until
7
to disconnect the de-
7
repeatedly until
7
to unpair the device.
7
to unpair all cell
Bluetooth® | External audio sources | Sound settings

External audio sources

Front AUX-IN socket

Danger!
Increased risk of injury from
connector.
In case of an accident, the protruding connector
in the front AUX-IN socket may cause injuries. The
use of straight plugs or adapters leads to an in-
creased risk of injury.
For this reason, we recommend using angled jack
plugs.
As soon as an external audio source, such as a
portable MP3 player is connected to the front
:
AUX-IN socket , it can be selected with the SRC
1
button . "AUX" then appears on the display.

Sound settings

The following sound settings can be changed in
the "AUDIO" menu:
• Adjusting bass and treble
• Setting the left/right volume distribution
(Balance) or front/rear (Fader)
• Adjusting the increase of bass at low volume
(X-Bass)
• Selecting a sound profi le (Presets)
Note:
To increase the volume and sound volume
in the driver's cab, an amplifi er or active sub-
woofer can be added and connected to the
car sound system.
Calling and exiting the "AUDIO"
menu
u Briefl y press the MENU button
the user menu.
u Press the
/ button
the "AUDIO" menu item is selected.
u Press the
button
menu.
<
to open
7
repeatedly until
7
to open the "AUDIO"
17