Blaupunkt Professional Bedienungs- Und Einbauanleitung Seite 15

As soon as your calling party answers the call,
the display shows "CALL" and the time of the
current phone call.
Upon ending the call, the display briefl y
shows "END CALL".
Making a call with voice dial
Note:
This function is only available if the connected
cell phone supports voice dial.
u In the Bluetooth® menu, select the "VOICE
DIAL" menu item.
u Press the
button
ognition.
- or -
u Press the
button
onds to activate the voice recognition with
the speed dial.
The car sound system is muted and the dis-
play shows "SPEAK NOW".
u Say the name of the desired calling partner.
Notes:
• If no Bluetooth® connection is established
when voice recognition is activated, the
display briefl y shows "VOICE DIAL FAILED".
• If the spoken name is not being recognised
or the time for the voice recognition has
already expired, the display briefl y shows
"VOICE DIAL FAILED".
• You can cancel the voice recognition by
pressing the
• Please note that the duration of the voice
recognition is limited and depending on
the respective cell phone.
Storing a phone number in the car sound
system
You can store three phone numbers in the car
sound system and place calls with the speed dial
(see the following section).
7
to activate voice rec-
=
for approx. 2 sec-
>
button .
u Enter the phone number as described in the
section "Making a call".
u Press the desired memory button 1 - 3
approx. 2 seconds to store the number.
You can now enter a name with up to 15 char-
acters:
u Turn the volume control
acter for the respective position.
u Press the
or button
or previous position.
Note:
You can also reach the next position by press-
ing the ON/Off button
u Press the memory button 1 - 3
approx. 2 seconds to store the number and
name.
The display briefl y shows "NUMBER SAVED".
Afterwards, you are returned to the Blue-
tooth® menu and the "DIAL NEW NUMBER"
menu item.
Note:
A number previously stored on the memory
button is replaced.
Speed dial for any phone number or for the
number dialed last or a stored number
With speed dial, you can make a call without fi rst
having to select the corresponding function in the
Bluetooth® menu.
To call the number dialed last,
u press the
button
The display shows the number dialed last.
Note:
If no cell phone is currently connected, the
Bluetooth® menu is opened. The "PAIRING"
menu item is selected.
u Press the
button
"CALLING" and the dialed number are alter-
nately shown on the display.
Bluetooth®
;
for
4
to select a char-
7
to reach the next
2
.
;
again for
=
.
=
to call the number.
15