Bluetooth® (Professional Only); The Bluetooth® Menu; Pairing And Connecting A Bluetooth® Device - Blaupunkt Professional Bedienungs- Und Einbauanleitung

Fast browsing is switched on or off in the user
menu (see the chapter "User settings", section
"Making settings in the "VARIOUS" menu", menu
item "BROWSE").
Note:
With activated fast browsing, you cannot
change the volume in browse mode. To do
so, fi rst exit the browse mode by pressing
the button 1 LIST
playback.
Bluetooth®
(Professional only)
You can connect the car sound system via Blue-
tooth® with other Bluetooth®-ready devices, such
as cell phones or MP3 players. This allows you to
use the car sound system with its microphone as
hands-free system for connected cell phones and
control the audio output of other Bluetooth® de-
vices and play them back via the loudspeakers of
the car sound system (Bluetooth® streaming).
Bluetooth® technology is a wireless connection of
short range. For this reason, Bluetooth® devices
must be located near the car sound system (in the
vehicle) to establish and maintain a connection.
To establish a Bluetooth® connection, you must
fi rst pair the car sound system and the Bluetooth®
device. When you pair the devices, a Bluetooth®
connection is subsequently established automati-
cally. This connection remains in eff ect as long as
the Bluetooth® device is within range. If the con-
nection is interrupted, e.g. because you moved
the cell phone outside the range, the connection
is automatically re-established as soon as you are
back within range.
You can connect only one cell phone and stream-
ing device with the car sound system at a time.
If you connect a new device with the car sound
system, the connection to a currently connected
device may automatically be interrupted. How-
ever, the car sound system leaves up to 5 diff erent
Bluetooth® devices paired, and you can quickly
and easily connect any of these devices with the
car sound system again.
;
or starting the track
CD/MP3/WMA mode | Bluetooth®
The Bluetooth® menu
In the Bluetooth® menu, you fi nd all the functions
for pairing, connecting and managing Bluetooth®
devices.
Calling the Bluetooth® menu
u Briefl y press the MENU button
the user menu.
u Press the
/ button
the "BLUETOOTH" menu item is selected.
u Press the
button
tooth® menu.
u Press the
/ button
the desired menu item is selected.
u Perform the setting (see the following sec-
tions).
u Briefl y press the MENU button
menu.
Notes:
• The Bluetooth® menu is automatically ex-
ited approx. 30 seconds after the last but-
ton activation and you are returned to the
display of the current audio source.
• In the menu, you can press the button
7
in each case to return to the higher
menu level.
Pairing and connecting a Bluetooth®
device
Notes:
• You can pair up to 5 Bluetooth® devices
with this car sound system. If you register a
sixth one, the Bluetooth® device registered
fi rst is deleted.
• If a connection with a Bluetooth® device
currently exists, this connection is auto-
matically disconnected if you pair and
connect another device.
If a connection to a Bluetooth® device exists,
u select the "PAIRING" menu item in the
Bluetooth® menu and press the button
u Press the button
pairing mode.
<
to open
7
repeatedly until
7
to open the Blue-
7
repeatedly until
<
to exit the
7
7
again to activate the
13
.