Additional Functions; External Audio Sources; Restoring Factory Settings; Technical Data - Blaupunkt Buenos Aires 200 Einbauanleitung

Additional functions

Additional functions

External audio sources

Connecting external audio sources
You can connect external audio sources, such as
portable CD players, MiniDisc players, MP3 play-
ers, via the FRONT-AUX-IN socket 8 (AUX input)
and play them back in AUX mode via the loud-
speakers of the car sound system.
Changing to AUX mode
Press the On/Off button 4 repeatedly until
u
"AUX" appears.
Notes:
• You can switch off the AUX input if no other
external audio source is connected (see
the chapter "User settings", section "Per-
forming settings in the user menu", menu
item "AUX").
• You can select a different name for the AUX
input than "AUX" (see the chapter "User
settings", section "Performing settings in
the user menu", menu item "NAME SET").

Restoring factory settings

Press the reset button : with a pointed ob-
u
ject (e.g. a pin or the tip of a ball-point pen).
Factory settings in the user menu:
SYNC ON
DIM OFF
SWPRE R
SPRM ON
NEWS OFF
LO.S OFF
DEMO OFF
AF ON
REG ON
ATPS ON
MONO OFF
SCL OFF
AUX ON1
CD READ 1

Technical data

Amplifi er
Output power:
Tuner
Wavebands (Europe):
FM:
MW:
LW:
FM frequency response:
CD
Frequency response:
Pre-amp out (Buenos Aires 200 only)
2 channels:
Input sensitivity
AUX input:
Dimensions and weight
W x H x D (mm):
Weight:
Subject to changes
Technical data
4 x 30 watts sine in
accordance with
DIN 45324 at 14.4 V
at 4 ohms.
4 x 50 watts max.
power
87.5 - 108 MHz
531 - 1,611 kHz
153 - 281 kHz
30 - 15,000 Hz
20 - 20,000 Hz
2 V
1.2 V / 10 kΩ
182 x 53 x 155
approx. 1.30 kg
33