Herunterladen Inhalt Inhalt Diese Seite drucken

Safety Instructions; Sicherheitshinweise; Installation Instructions; Einbauanleitung - Blaupunkt Professional Bedienungs- Und Einbauanleitung

Car radio, cd, usb, sd, bluetooth
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 24
Installation instructions | Einbauanleitung
EN Installation instructions

Safety instructions

When carrying out installation work and
making connections please observe the following
safety instructions:
Disconnect the negative terminal of the bat-
tery! When doing so, please observe the vehi-
cle manufacturer's safety instructions.
Make sure you do not damage vehicle compo-
nents when drilling any holes.
The cross sections of the positive and negative
cables must not be less than 1.5 mm².
Do not connect the vehicle's plug connec-
tors to the radio!
You can obtain the adapter cable required
for your vehicle type from any BLAUPUNKT
dealer.
Depending on the model, your vehicle may
diff er from the description provided here. We
accept no responsibility for any damages due
to incorrect installation or connection or for
any consequential damages.
If the information provided here is not suita-
ble for your specifi c installation requirements,
please contact your Blaupunkt dealer, your ve-
hicle manufacturer or our telephone hotline.
When installing an amplifi er, you must fi rst con-
nect the device earth connections before con-
necting the plugs for the line-out jacks.
Earth connection of external devices may not
be connected to earth of car sound system
(housing).
346
DE Einbauanleitung

Sicherheitshinweise

Für die Dauer der Montage und des An-
schlusses beachten Sie bitte folgende Sicherheits-
hinweise.
Minuspol der Batterie abklemmen! Dabei die
Sicherheitshinweise des Kfz-Herstellers be-
achten.
Beim Bohren von Löchern darauf achten, dass
keine Fahrzeugteile beschädigt werden.
Der Querschnitt des Plus- und Minuskabels
darf 1,5 mm² nicht unterschreiten.
Fahrzeugseitige Stecker nicht an das Radio
anschließen!
Die für Ihren Fahrzeugtyp erforderlichen
Adapterkabel erhalten Sie im BLAUPUNKT-
Fachhandel.
Je nach Bauart kann Ihr Fahrzeug von dieser
Beschreibung abweichen. Für Schäden durch
Einbau- oder Anschlussfehler und für Folge-
schäden übernehmen wir keine Haftung.
Sollten die hier aufgeführten Hinweise für
Ihren Einbau nicht passen, so wenden Sie
sich bitte an Ihren Blaupunkt-Fachhändler,
Ihren Fahrzeughersteller oder unsere Telefon-
Hotline.
Bei Einbau eines Amplifi er müssen unbedingt erst
die Gerätemassen angeschlossen werden, bevor
die Stecker für die Line-Out-Buchse kontaktiert
werden.
Fremdgerätemassen dürfen nicht an der Auto-
radiomasse (Gehäuse) angeschlossen werden.

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Basic

Inhaltsverzeichnis