3M Digital Media System 800 Serie Betriebsanleitung Seite 18

Basic Operations
Action
Picture Picture modes are provided so the user can
Mode simply optimize the projector image set-up to
suit his/her program type:
1) TV
2) Business
) Cinema
4) Sports
Brightness Adjusts the brightness of the image. The higher the setting, the brighter the image. The lower
the setting, the darker the image.
Contrast Adjusts the degree of difference between the dark and light in the image. The higher the value,
the greater the contrast.
Color Adjusts the intensity of the color in the image.
Hue Adjusts the balance of red-to-green necessary for realistic representation of video signals.
If input is NSTC then the Tint/Hue is Active
If input is Pal than the Tint/Hue is InActive
For all other component input, Tint/Hue is Active
Sharpness Adjusts the image to make it look sharper or softer. (At higher values, will switch to Detail
Enhancement)
Detail Brings out the detail of the image:
Enhance
Position Adjusts the vertical and horizontal position of the projected image.
Only VGA, DVI-D and DVI-A is Active.
18
Picture sub menu
Description
The Color, adjustment values will change, but
the user will adjust the Color settings relative
to the Picture Modes.
Picture Mode Options
1) Color Temperature
2) Gamma Table
) Brightness
4) Contrast
5) Noise Reduction
M Digital Media System 800 Series
™
© M 2006. All Rights Reserved.