3M Digital Media System 800 Serie Betriebsanleitung Seite 24

Basic Operations
Action Description
Language Allows the user to select the Menu language:
1) English
2) French
) Spanish
4) Deutsch
5) Italiano
Auto-Shutoff Powers down unit. (No active signals are present)
1) 5 mins
2) 10 mins
) 15 mins
4) 20 mins
H-Keystone Horizontal Keystone adjustment (±0)
V-Keystone Vertical Keystone adjustment ( ±20)
Reset Lamp hrs Resets the Lamp hours status indicator in the Status window.
Lamp Mode 1) Normal 2) Eco
Fan Mode ) Normal 4) High
Projection Mode The projector can be installed on a ceiling or behind a screen
1) Front Projection
2) Rear Projection
Auto-Switch Sets whether the projector searches automatically for input signals. If the source scan is
Input on, the projector will scan for input signals until it acquires a signal. If the function is not
activated, the projector selects the last used input signal.
- Change Function to Cycle through the Signals (On/Off)
Factory Reset Resets all Menu items to Factory default settings.
Reset Resets values in this sub-menu only.
24
Setup Display sub menu
6) Portugese
7) Japanese
8) Mandarin Traditional
9) Mandarin Simplified
5) 0 mins
6) 45 mins
7) 60 mins
Table 6: Setup sub menu function description
M Digital Media System 800 Series
™
© M 2006. All Rights Reserved.