Image Adjustment; Menu Navigation - 3M Digital Media System 800 Serie Betriebsanleitung

M ™ Digital Media System 800 Series

Image Adjustment

1. Set optical engine (head) adjustment screws to nominal height.
2. Set arm mount adjustment screws to nominal height.
. Set base skew adjustment screw to nominal height.
4. Adjust image size to 60" +/- 0.5".
5. Adjust head adjustment screws to position image on target.
- Top center of image on target top center.
- Top line of image skew to within skew specification.
6. Adjust base only if head adjustment screw range is exceeded.
7. Adjust base for right/left keystone (right height - left height).
8. Adjust head for position.
9. Adjust base for top/bottom keystone (top width - bottom width).
10. Adjust head for position.
11. Repeat 4 to 10 as needed to meet specifications.
12. Lock all adjustment.

Menu Navigation

Most adjustments and settings are available in the main menu and sub-menus. To display and navigate the menu
press the projector Menu Keypad button on the unit or the remote control Menu button. Use the Menu Keypad
arrow buttons or the Direction Knob to move through the menu. Click the Enter button to change a menu item.
Change the menu item by using the Menu Keypad or Direction Pad and then click Enter to return back to menu
navigation.
© M 2006. All Rights Reserved.
Basic Operations
17