Login In A 1-Person Cabin - b-intense b-control Deluxe Bedienungsanleitung

Login in a 1-person cabin

Press the program symbol
With the symbols + and – you can choose your favourite program. The chosen program starts automatically after a 5 seconds waiting time
(do not press any other symbol during these 5 seconds).
The b-intense program selection contains:
®
b-control Deluxe
1. PREHEATING
2. BACK
3. HEAT LOAD
4. REGENERATION
5. VITALISATION
6. SLIM
7. NO PROGRAM
 The display then starts from the beginning and you can click through the program
selection again.
 Please take notice that the specifications concerning the LED colour light is only
valid for the closed b-intense
LED-colour light and the b-control unit Deluxe.
 If a program starts unintentionally due to long residence time in the menu, please
switch the cabin off and on again, and select the desired program.
Program Login:
After deciding for one user program, you have to wait 5 seconds, then the pro-
gram logs in automatically. Now the display shows you the current status of the
chosen program and informs you about:
› Name of the program
› Choice of seat for the program*
› Remaining time of the program
› Current intensity of the program progress
› Current temperature in the cabin
 * The note R/L indicates that you have selected the program for the entire cabin. There is no other display presentation in 1-person-cabins.
and enter the b-intense program menu.
®
b-control Basic
1. BACK
2. HEAT LOAD
3. SLIM
infrared cabins that are equipped with the
®
40