Program Selection In A 2-Person Cabin - b-intense b-control Deluxe Bedienungsanleitung

Program selection in a 2-person cabin

In a 2-person cabin you can choose a different program for each seat. Thus you can enjoy the heat for two; the program is, however, tailored
to your needs. Select a program and assign your selection to one place:
 „R/L" for both seats at the same time, „R" for right and „L" for left and this is how it works:
Press the program symbol
With the symbols + and – you can choose you favourite program.
The b-intense program selection contains:
®
b-control Deluxe
1. PREHEATING
2. BACK
3. HEAT LOAD
4. REGENERATION
5. VITALISATION
6. SLIM
7. NO PROGRAM
 The display then starts from the beginning and you can click through the program selection again.
 Please take notice that the specifications concerning the LED colour light is only valid for the closed b-intense
are equipped with the LED-colour light and the b-control unit Deluxe.
 If a program starts unintentionally due to long residence time in the menu, please switch the cabin off and on again, and select the
desired program.
In the standard overview you can see the program chosen for both seats "R/L" together. If you want to select a different program for each
seat, please proceed as follows.
With the symbols + and – you can choose you favourite program.
After reaching your favourite user program, you:
: program symbol for „R" (person, who sits on the right side in the cabin)
1x Press
2x Press : program symbol for „L" (person, who sits on the left side if the cabin)
and enter the b-intense program menu.
®
b-control Basic
1. BACK
2. HEAT LOAD
3. SLIM
41
infrared cabins that
®