b-intense b-control Deluxe Bedienungsanleitung Seite 42

Program Login:
After deciding for one user program for one seat, you have to wait 5 seconds, then the
program logs in automatically.
Note: It does not make any difference if you start with „R" or „L". The second user can
even sit later in the cabin and then start his desired program.
Now the display shows you the current status of the chosen program and informs you about:
› Name of the program
› Choice of seat for the program*
› Remaining time of the program
› Current intensity of the program progress
› Current temperature in the cabin
*The note R shows you the current status for the right place, the note L shows the current status for the left seat. The note R/L shows you
the status for both seats, in case you chose the same program for both seats.
After that you can choose the user program for the second seat:
Press again the program symbol . You will directly get into the program selection
and can now choose the program for the second seat with the symbols + and –.
After deciding for one user program for one seat, you have to wait 5 seconds, then the program logs in automatically.
Status display of the different seats
After choosing the program for the second seat you can see your choice for 10
seconds. Then the display switches to the status of the first chosen seat.
If you want to see the status of the second seat, please press 1x on the program symbol . After ten seconds it changes back.
42