b-intense b-control Deluxe Bedienungsanleitung Seite 34

Key to operating symbols
Function
Front Heater
Back Heater
Floor Heating
user programs
LED Colour Light
Music
FAN
(Fresh AIR System)
Speaker Volume
AUX-Port
Property
Set the desired right and left intensity with the +/- buttons
Press one more to set the desired intensity on the right side
Press one more to set the desired intensity on the left side
Set the desired right and left intensity with the +/- button
Press one more to set the desired intensity on the right side
Press one more to set the desired intensity on the left side
Set the desired intensity with the +/- button
By touching this symbol once you enter the menü for the b-intense(r9 user programs.
Read more about them on page 12.
Turn ON or OFF (touch twice) when an optimal colour light is installed.
Set the desired colour with the +/- button
By touching this symbol, music play back is started from the SD Card (in the power mo-
dule). Selection can be made from the carious audio files with the +/- buttons.
The ON – AUTO – OFF functions can be selected by touching this symbol.
In AUTO mode the fan runs when the interior temperature of the cabin exceeds 40° C.
During audio playback (MP3 or AUX) touch this symbol using the +/- buttons to adjust
the speaker volume.
Pressing AUX to hear the audio from the device connected to the AUX terminal – this
starts the playback of external audio sources. 3.5 mm audio jacks can be found on the
control unit (AUX).
34