Spare Parts - VWR Signature Ergonomic Benutzerhandbuch

12 - SPARE PARTS

All the spare parts indicated in Fig. 3, 4, 5, 6:
A: Pushbutton A1: Pushbutton
B: Adjustment knob
C: Shaft
D: Ejector
F: Shaft nut
G: Piston assembly
H: Spacer
I: O-ring
J: Seal
K: Calibration key
L: Filter
M: Tip ejector cap
N: Ejector pushbutton
P: Locking ring
Spare parts can be ordered from a VWR representative
(type of the pipettor and name of the part for this pipettor
should be specified).
Warning: The replacement of the plunger requires
con duc ting of calibration procedure according to
section 8.
Contact your local VWR office via the internet at vwr.com.
15
A2: Knob
ENGLISH
16