♦
If the quadrocopter starts drifting again, repeat the process.
Troubleshooting
This section contains important information about fault identification and rectifica-
tion. Follow the instructions to avoid hazards and damage.
Fault causes and rectification
The following table will help you to identify and rectify minor malfunctions:
Faults
Remote control
does not work.
Quadrocopter is
not responding.
Quadrocopter
cannot be con-
trolled.
Quadrocopter
will not climb.
QC 360 A1
Possible cause
The remote control is not
switched on.
The batteries are inserted
incorrectly.
Batteries are discharged.
No power supply.
Batteries in the remote control
are empty.
Possibly out of range.
Excessive wind or air currents.
Not enough power.
Rechargeable battery
Remedy
Switch on the remote control.
Check the batteries and, if neces-
sary, insert them correctly.
Replace the batteries.
Check the battery connection
on the quadrocopter.
Charge the battery (if recharge-
able) or replace the batteries in
the remote control.
Ensure that the distance between
the remote control and the quadro-
copter is no greater than 30 metres.
Do not fly in strong wind or air
currents as the quadrocopter is
not suitable for these conditions.
Push the throttle lever
way forward.
is flat.
Recharge the battery
all the
.
GB │ IE │
│
13
■