Changing The Rinsing Program; Additional Loading Of Dishes - KKT KOLBE GS6013ED Benutzerhandbuch

Rinsing programs

4.2 Changing the rinsing program

Changing of the washing program should be carried out imme-
!
diately after the start of the program, otherwise the tablets
could be already solved or hot water may be leaking.
1. Slowly open door of the appliance.
2. Wait about a minute until fully opening the door, so you can be sure that
the spray arms stop working.
3. Press the program selector button
to cancel the rinsing program. Then press it again to select the rinsing
program.
4. Select the program you want to use.
5. Close the door firmly until you hear a click of the door lock.
6. After a few seconds you will hear how the machine fills with water and
the wash cycle begins.
4.3 At the end of the rinsing program
1. The audio signal will ring 6 times.
2. Turn the dishwasher off using the ON/OFF-button
3. Before taking out the dishes we recommend that you wait at least five
minutes in order to avoid taking out dishes that still may be hot or
fragile. The dishes are also dry better if you leave it longer in the open
dishwasher.
4. Open the door and take the dishes out.

4.4 Additional loading of dishes

The additional loading of the dishes in the dishwasher is only possi-
!
ble when the washing program has just been started, otherwise the
detergent and the water may leak.
1. Slowly open the door of the dishwasher and wait until the spray arms
stop working. (Risk of burns)
2. Now you can fully open the door and additionally load the dishes in the
dishwasher.
and hold it down for 3 seconds
.
55