KKT KOLBE GS6013ED Benutzerhandbuch Seite 64

Troubleshooting
7.2 General diagnosis
Problem
The dishwasher
doesn't work.
The drain pump
doesn't stop.
Sound/Noise
64
Possible causes
The fuse has blown or the
safety switch of the circuit
has been actuated.
The power supply is not
turned on.
Low water pressure.
Overflow.
Some noise is normal.
The kits are not stored
in the baskets or a small
object has fallen into the
basket.
The engine „purrs".
Help
Replace the fuse or set the safety switch
of the circle. Shut off all other appliances
that are connected to the same circuit as
the dishwasher.
Make sure that the dishwasher is turned
on and the door is closed properly. Make
sure that the plug of the power cable is
fully inserted into the socket.
Check that the water supply is connected
properly and that the water supply line
is open.
The system is designed with a security
system so that any overflow is detected.
When an overflow is detected, it conti-
nues to run the drain pump if the unit is
powered.
During the rinse cycle, a certain operating
sound arises, especially when the food
residues are removed from the inserted
objects and when the detergent dispen-
ser pushes the tablet inside arises.
Ensure proper positioning of the objects
according to the instructions for their
contribution.
If the dishwasher doesn't work for a
longer period, make sure that the device
is set to one of the washing programs.
Otherwise, the gasket can dry out the
motor and lead to a higher noise level of
the machine.