Detergent Dispenser - KKT KOLBE GS6013ED Benutzerhandbuch

Using the dishwasher
Adjusting the rinse aid dispenser
The amount of rinse aid that consumes the dishwasher, also
depends on the water hardness. With the setting of the rinse aid
dosage you should experiment until you find the optimum setting
that ensures the best results.
• We recommend that the first flushing adjust the rinse aid dispen-
ser at number 4.
• If there are water spots on the dishes or the dish is not dry
enough, move the arrow counter-clockwise and set it to the next
higher number.
• Set the rinse aid dosage to no water stains will last as long a
upward.
• If there are streaks and stripes on the dishes, the setting of the
rinse aid dosage could be too high. This causes foam during the
flush. Move the arrow clockwise to the next lower number.

3.5 Detergent dispenser

The dosing of the detergent must each time the flushing are filled
(except for the flush mode).
• Open the lid of the detergent container (1) and fill in the deter-
gent (2).
Warning!
Dishwasher detergent is corrosive! Take care to keep it out of reach of children!
• Use only detergent specifically made for use in dishwashers.
• Keep your detergent fresh and dry.
• Don't put powder detergent into the dispenser until your ready to wash dishes.
47