Changing The Program; Additional Loading Of Dishes - KKT KOLBE GS6013ED Benutzerhandbuch

Using the dishwasher
4.2 Changing the washing program
Changing of the washing program should be carried out imme-
!
diately after the start of the program, otherwise the tablets
could be already solved or hot water may be leaking.
1. Slowly open door of the appliance.
2. Wait about a minute until fully opening the door, so you can be sure that
the spray arms stop working.
3. Press the program selector button and hold it down for 3 seconds to
cancel the wash program. Then press the program select button to
select the wash program.
4. Select the program you want to use.
5. Close the door firmly until you hear a click of the door lock.
6. After a few seconds you will hear how the machine fills with water and
the wash cycle begins.
4.3 At the end of the washing program
1. The audio signal will ring 6 times.
2. Turn the dishwasher off using the ON/OFF-button.
3. Before taking out the dishes we recommend that you wait at least five
minutes in order to avoid taking out dishes that still may be hot or
fragile. The dishes are also dry better if you leave it longer in the open
dishwasher.
4. Open the door and take the dishes out.

4.4 Additional loading of dishes

The additional loading of the dishes in the dishwasher is only possi-
!
ble when the washing program has just been started, otherwise the
detergent and the water may leak.
1. Slowly open the door of the dishwasher and wait until the spray arms
stop working. (Risk of burns)
2. Now you can fully open the door and additionally load the dishes in the
dishwasher.
21