Rinsing programs / Functions
„Dry+"
Select this function for particularly effective drying performance.
The temperature is increased and the drying function is intensified.
„Half load"
Use this function if you want to start a washing cycle even though the
machine is only half full of dishes.
You can also combine the above functions using the
„3 in 1" und „Dry+"
„3 in 1" und „Half load"
„Dry+" und „Half load"
„3 in 1", „Dry+" und „Half load".
During simultaneous operation, the corresponding lamp flashes.
4.7 Refilling signal lamps
•
The pilot light
dishwasher.
•
The pilot light
washer.
4.8 Key lock / Children lock
•
You can lock the control panel to avoid unintended interference.
All buttons are without function when activating the lock.
Press the Function-button
•
start
at the same time and hold it for 3 seconds to switch the
key-lock on and off.
indicates that you should fill the rinse aid into the
indicates that you should fill salt into the dish-
and the button for the delayed
key:
57