Werbung
6
Install the wire management assembly and wall plate covers onto the wall plate.
Mount the upper cover [07] using the 1⁄8 in. hex key [27] to install four screws [31].
Mount the lower cover [07] using the 1⁄8 in. hex key [27] to install four screws [31] while fi tting the rear mount of the wire managment assembly [09] between
the cover [07] and the lower horizontal of the wall plate [08].
Install the front mount of the wire management system to the back side of the face plate of the wall plate [08] using two screws [31].
[07]
[08]
[31]
4
[07]
4
[31]
[09]
[08]
[30]
[27]
[31]
22
6901-002067<03>
Werbung
