Werbung
5
Wall Mounting
For assistance in determining wall plate location, see Height Finder at sanus.com.
5-1: Wood Stud Mounting
CAUTION:
Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:
Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 5.5 mm (7/32 in.) diameter drill bit.
Do not over-tighten the lag bolts [36].
Any material covering the wall must not exceed 16 mm (5/8 in.).
5-2: Solid Concrete and Concrete Block Mounting
CAUTION:
Improper use could reduce the holding power of the lag bolt. To avoid potential injuries or property damage:
Pilot holes MUST be drilled to a depth of 75 mm (3 in.), using a 10 mm (3/8 in.) diameter drill bit.
Be sure the anchors [34] seat fl ush with the concrete surface.
Mount wall plate directly onto the concrete surface.
Never drill into the mortar between blocks.
Do not over-tighten the lag bolts [36].
18
CAUTION:
6901-002067<03>
Werbung
