Werbung
2
Install TV Bracket for TV's with fl at backs
Before you begin, hand thread screws into the threaded inserts on the back of your TV to determine the correct screw diameter (M4, M5, M6, or M8). Verify
that there are adequate threads to secure the brackets to the monitor. If you encounter resistance, stop immediately and contact customer service.
CAUTION:
Avoid potential personal injuries and property damage! Use the shortest screw and spacer combination to accomodate your needs. Using
hardware that is too long may damage your monitor's internal components.
Assembling TV Brackets for TV's with fl at backs
A.
Slide the vertical brackets [06] onto the horizontal brackets [02] and [03].
[06]
B.
Position the assembly over the TV and slide the vertical brackets left or right until they are over the mounting holes in the back of the TV. Make sure
vertical brackets [06] will be equally spaced top to bottom on the TV and that the assembly will be level.
14
CAUTION:
[02]
[03]
[06]
6901-002067<03>
Werbung
