Technical Specification - Elcometer 500 Bedienungsanleitung

22 TECHNICAL SPECIFICATION

Model
Thickness
f
Range
i
Accuracy
Resolution
(user selectable)
Measurement
j
Rate
Gauge Memory
Operating
Temperature
Power Supply
k
Battery Life
Gauge Weight
Gauge
Dimensions
Can be used in accordance with:
ASTM D6132, SSPC-PA 9, ISO 2808 Method 10
f
Epoxy coatings, thickness on other materials may vary.
i
Whichever is the greater.
j
140+ readings per minute when using the Model T in Scan Mode.
k
When in continuous reading mode. Rechargeable batteries may differ.
www.elcometer.com
Model B
Using C1 Probe:
Using C2 Probe:
±2% or ±10µm (±2% or 0.4mils)
Low: 10µm, 0.01mm, 1mils or 0.001"
High: 1µm, 0.001mm, 0.1mils or 0.0001"
60+ readings per minute
None
-10 to 50°C (14 to 122°F)
(rechargeable batteries can be used)
Alkaline: Approximately 15 hours
Lithium: Approximately 28 hours
including batteries, without probe
141 x 73 x 37mm (5.55 x 2.87 x 1.46")
0.15 - 2.50mm (6 - 98mils)
0.75 - 9mm (30 - 355mils)
100,000 readings in up to
1,000 batches
2 x AA batteries
161g (5.68oz)
without probe
Model T
en-34
R