Operation; Main Unit Operation - Sharp FU-S25E Bedienungsanleitung

OPERATION

MAIN UNIT OPERATION

Plasmacluster Indicator Lights
Plasmacluster ION Mode Indicator Lights
AUTO operation
The fan speed is automatically switched (HIGH*, MEDIUM,
SILENT) depending on the amount of impurities in the air.
The sensors detect the impurities for efficient air purifica-
tion.
ION SHOWER operation
The concentrated Plasmacluster Ions (ION SHOWER) will
be generated in the room like a shower for 15 minutes,
repeating the airflow cycles between strong and gentle.
(The Plasmacluster Indicator Light repeats its colour
cycles between light and shade.), and effectively controls
the airborne dust, pollen, mold, and allergen.
•When finished the operation, the unit will back to the Auto
operation.
POLLEN mode operation
The unit will operate at HIGH* fan speed for 10 minutes,
then will alternate between MEDIUM and HIGH* for
20 minutes.
10 minutes: HIGH fan speed
20 minutes: MEDIUM fan speed
20 minutes: HIGH fan speed
Power ON/OFF Button
• Used to start operation (short beep) and stop operation (long
beep)
• Plasmacluster Indicator Light and Fan Speed Indicator Light
turn on/off.
• Unless unplug the power cord, the operation starts in the
previous mode the unit was operated in.
MODE Selection Button
• The operation mode can be switched.
E-8
MAX operation
The unit will operate at a
fan speed of MAX.
MEDIUM operation
The unit will operate at a
fan speed of MEDIUM.
SILENT
operation
The unit will operate
quietly using minimal air
intake.
* HIGH fan speed is an in-
termediate speed be-
tween MEDIUM and MAX.