Rear Panel; Other Indicators - DePuy Mitek FMS solo Bedienungsanleitung

1
I/O switch, fuses and
1
power connection.
1 Identification & specification.
1 Foot pedal connection.
9 - pin connector to plug foot pedal.
1 Shaver interface connection.
25 - pin hand and foot control
interface cables connector.
1.. Other indicators (Audible tones).
.
An audible tone sounds when the POWER pad is
pressed and the pump turns on.
.
An audible tone sounds when the PRESSURE
mode is activated (see pressure cycle section to
activate the cycle).
B – Rear panel
1
Serial number.
18
. The first two digits represent the
year of manufacturing.
. The second set of digits represents
the week of manufacturing and
serial number.
19 Reference number.
.
Two audible tones sound when the PRESSURE
mode is deactivated (see chapter 4 to deactivate
the cycle).
1
19
18
1
1