DePuy Mitek FMS solo Bedienungsanleitung Seite 13

Pressure cycle.
8
Alleviates bleeding by increasing base
pressure for a 2 minute cycle.
9 PRESSURE adjustment pads.
Press the arrows to increase or
decrease the pressure in increments
of 5. The initial setting is 50.
Pump Run/Stop pad.
10
Turns the pump ON and OFF. If the
pump is activated, <PUMP> appears
on the pressure display. Green LED
blinks when pump is on stop.
11 Built-in Pressure transducer
connection.
To connect the �One Day Set™�
and measures the pressure in the
pressure chamber.
12 Fill Chamber pad.
Manually fills the chamber and turns
off the LOW PRESSURE alarm.
1 Patented auto-locking device.
Allows the disposable tubing to be
properly positioned and locked in
place around the roller pump.
1