Maintenance; Wear Parts; Cleaning - Samson 582 Originalbetriebsanleitung

Original-Betriebsanleitung
Translation of the original operating instructions
2/2 Schrägsitzventil Typ 582
2/2 Angle Seat valve Typ 582
6.

Maintenance

Maintenance is only allowed to be carried out by trained staff.
seat valves are low-maintenance parts. They must be checked and maintained periodically. These
periods are depending on working load and must be defined according to valid rules.
6.1.

Wear parts

The seat seal is a wearing part and subject to natural wear.
The actuator is a low-maintenance part, if all regulations of this operation manual are respected.
Available spare parts are the actuator and the valve body.
Important Information for ordering spare parts is the article code and order number, which you will find
on the type plate of the valve.
To order spare parts, please contact us via info@sed-flowcontrol.com or asked your local dealer
under www.sed-flowcontrol.com .
The lifetime of the valve dependent on following factors:
•
Media
•
Operating temperature
•
Operating pressure
•
Closing force
•
Correct assembly and use
6.3.

Cleaning

For external cleaning, commercially available cleaning agents can be used. Check the chemical
resistance of all materials used in the valve, which could come in contact with the cleaning agent,
before applying
For sterilization processes, check if the valve is suitable for the applied process.
© 2019 SED Flow Control GmbH, Bad Rappenau 32 BA190006; Version a vom 30.08.2019