Working Position; Boiler Fixing - Riello Gulliver RG2KD Typ 381T1 Montage- Und Bedienungsanleitung

3. INSTALLATION
THE BURNER MUST BE INSTALLED IN CONFORMITY WITH LEGISLATION AND LOCAL STANDARDS.
3.1

WORKING POSITION

The burner is designed to work only in the po-
sitions 1, 2, 4 and 6.
Any other position could compromise the cor-
rect working of the appliance.
Installations 3 and 5 are forbidden for safety
reasons.
3.2

BOILER FIXING

To fit the burner to the boiler it is necessary to carry out the following:
Put on the flange (1) the screw and two nuts, (see fig. 3).
®
® Widen, if necessary, the insulating gasket holes (5), (see fig. 4).
Fix the flange (1) to the boiler door (4) using screws (2) and (if necessary) the nuts (3) interposing the
®
insulating gasket (5), (see fig. 2).
Fig. 4
D5012
3023
1
4
Fig. 3
3
GB
2 3
5 6
Fig. 2
S7209
D4420