Heat Generator Fixing; Working Position - Riello RG2F Montage- Und Bedienungsanleitung

3. INSTALLATION
THE BURNER MUST BE INSTALLED IN CONFORMITY WITH LEGISLATION AND LOCAL STANDARDS.

3.1 HEAT GENERATOR FIXING

Put on the flange (1) the screw and two nuts, (see fig. 3).
➤
Widen, if necessary, the insulating gasket holes (4).
➤
Fix the flange (1) to the heat generator door (3) using screws (5) and (if necessary) the nuts (2) inter-
➤
posing the insulating gasket (4), (see fig. 2).
3.2

WORKING POSITION

1
20062489
20061713
Fig. 2
Fig. 3
2 3 4
4 GB
20062488
5 6