Siemens SIPART PS2 Kompaktbetriebsanleitung Seite 51

Maximum values when powered by other
basic devices
Galvanic isolation
7.5.6 Non-contacting position sensor
Additional modules
Travel range
Linear actuator 6DR4004-.N.20
•
Linear actuator 6DR4004-.N.30
•
Part-turn actuator
•
Linearity (after corrections made by
positioner)
Hysteresis
Temperature influence (range:
rotation angle 120° or stroke
14 mm)
Climate class
Storage
•
Transport
•
Vibration resistance
Harmonic oscillations
•
(sine) according to IEC 60068-
2-6
Bumping according to IEC
•
60068-2-29
Torque for cable gland nut made of Plastic
Housing protection type
For connecting to circuits with the
following peak values
Effective internal capacitance
Effective internal inductance
Certificates and approvals
CE conformity
SIPART PS2 (6DR5...)
A5E03436620-05, 09/2014
Without Ex protection With Ex protection Ex ia
-
Galvanically connected with the basic device
Without Ex protection
10 ... 130 mm (0.39 to 5.12"); up to 200 mm (7.87") on request
≤ 0.1 %/10 K (≤ 0.1 %/18 °F) for -20 to +90 °C (-4 to +194 °F)
≤ 0.2%/10 K (≤ 0.2%/18 °F) for -40 to -20 °C (-40 to -4 °F)
1K5, but -40 to +90 °C (-40 to +194 °F)
2K4, but -40 to +90 °C (-40 to +194 °F)
3.5 mm (0.14"), 2 to 27 Hz, 3 cycles/axis
98.1 m/s² (321.84 ft/s²), 27 to 300 Hz, 3 cycles/axis
300 m/s
2.5 Nm (1.8 ft lb)
IP68 according to IEC/EN 60529; NEMA 4X / Encl. Type 4X
-
-
-
The applicable directives and applied standards with their revision levels can be
found in the EC declaration of conformity on the Internet.
U = 5 V
o
I = 100 mA
o
P = 33 mW
o
C = 1 μF
o
L = 1 mH
o
With Ex protection
Ex "ia"
3 to 14 mm (0.12 to 0.55")
30 ... 100°
± 1 %
± 0.2%
According to DIN EN 60721-3-4
(984 ft/s ), 6 ms, 4000 shocks/axis
2 2
Metal
4.2 Nm (3.1 ft lb)
U = 5 V
i
I = 160 mA
i
P = 120 mW
i
C = 180 nF
i
L = 922 μH
i
With Ex protection
Ex "ic", "nA", "t"
U = 5 V
o
I = 75 mA
o
P = 120 mW
o
C = 1 μF
o
L = 1 mH
o
With Ex protection
Ex "ic", "nA"
Stainless steel
4.2 Nm (3.1 ft lb)
U = 5 V
i
C = 180 nF
i
L = 922 μH
i
49