Other Features; Wireless Control - INVENTOR GR1VI32-12WF Benutzerhandbuch

A guide on using the infrared remote is not
included in this literature package.
the functions are available for the air
conditioner, please check the indoor display
and remote control of the unit you purchased.

Other Features

Auto-Restart
•
If the unit loses power, it will automatically
restart with the prior settings once power has
been restored.
Anti-mildew
•
(not available)
When turning off the unit from COOL, AUTO
(COOL), or DRY modes, the air conditioner will
continue operate at very low power to dry up
condensed water and prevent mildew growth.

Wireless Control

•
Wireless control allows you to control your air
conditioner using your mobile phone and a
wireless connection.
For the USB device access, replacement,
maintenance operations must be carried
out by professional staff.
Louver Angle Memory
•
When turning on your unit, the louver will
automatically resume its former angle.
Refrigerant Leakage Detection
•
The indoor unit will automatically display "EC"
or "EL0C"when it detects refrigerant leakage.
Intelligent Light Detection
•
When room light is turned off, the display
window and V-shape light area will slowly
darken after 5 seconds, and the buzzer turn off.
It will be back to normal after the light is
turned on.
NOTE: When room light is bright, the display
window and V-shape area remains on. When
the room light is dark, you can press the LED
button on the remote controller to turn on/off
the display window.
Smart Air Manager
•
When the unit is under COOL or AUTO
mode, press the SWING button on the
remote controller ,it will blow out very
comfortable & quiet wind, which
brings you feeling of nature.
ƒ Page 6 „
Sleep Operation
•
Not all
The SLEEP function is used to decrease
energy use while you sleep (and don't
need the same temperature settings to
stay comfortable). This function can only
be activated via remote control. And the
Sleep function is not available in FAN or
DRY mode.
Press the SLEEP button when you are
ready to go to sleep. When in COOL mode,
the unit will increase the temperature
by 1°C (2°F) after 1 hour, and will increase
an additional 1°C (2°F) after another hour.
When in HEAT mode, the unit will decrease
the temperature by 1°C (2°F) after 1 hour,
and will decrease an additional 1°C (2°F)
after another hour.
For some units, the sleep feature will stop
after 8 hours and the system will keep
running with nal situation.
Set
temperature
For some units, the unit will turn off after
7 hours.
Set
temperature
SLEEP Operation
Cool mode(+1 C/2 F) per hour
for the rst two hours
1hr
1hr
Heat mode( -1 C/2 F) per hour
for the rst two hours
Saving energy during sleep
SLEEP Operation
Hold the new
Cool mode(+1 C/2 F) per hour
temperature
for the rst two hours
for 5 hours
1hr
1hr
Heat mode( -1 C/2 F) per hour
for the rst two hours
Saving energy during sleep
Keep
running
7 hours
timer o
ƒPage 7
„