Fluval MSF 104 Bedienungsanleitung Seite 3

Instructions
3. Close supervision is necessary when any appliance is used by or near children.
4. To avoid injury, do not contact moving parts or hot parts
such as heaters, reflectors, lamp bulbs, etc.
5. Always unplug an appliance from an outlet when not in
use, before putting on or taking off parts, and before
cleaning. Never yank cord to pull plug from outlet. Grasp
the plug and pull to disconnect.
6. Do not use an appliance for other than intended use (i.e. don't use on swimming
pools, garden ponds, bathrooms, etc.). The use of attachments not recommended
or sold by the appliance manufacturer may cause an unsafe condition.
7. Do not install or store the appliance where it will be exposed to the weather or to
temperatures below freezing.
8. Make sure an appliance is securely installed before operating it.
9. Read and observe all the important notices on the appliance.
10. If an extension cord is necessary, a cord with a proper rating should be used.
A cord rated for less amperes or watts than the appliance rating may overheat.
Care should be taken to arrange the cord so that it will not be tripped over
or pulled.
11. The pump must not run dry.
SAVE THESE INSTRUCTIONS
12.
For the complete use and understanding of this power filter it is recommended
that this manual is thoroughly read and understood. Failure to do so may result
in damage to this pump.
Cont d
Introduction
For the complete enjoyment, use and understanding of this Canister Power Filter,i ti s
r ecommended that this manual be thoroughly followed. Failure to do so may re s u l t i n l o s s o f
f i s h l i f e a n d / o r d a m a g e t o t h i s f i l t e r. S a v e t h i s m a n u a l f o r f u t u rere f e rence.
This Fluval Canister Filter system incorporates the most advanced pump and media handling
technology presently available. It has numerous user features that permit greater control of
both the filter's interaction with the aquatic environment and the aquarist's desire to control
water characteristics. Now, more than ever, Fluval Canister filters provide a greater amount
of filter media and media configurations than any other comparable filter. A minimum of 4
and up to a maximum of 8 media types may be used in separate compartments, depending
on the filter chosen.
The space may be used according to the needs of each individual situation. Fluval
filters allow great flexibility to satisfy the many requirements of novice and advanced
enthusiasts alike.
Fluval Canister filters improve the way filter media is employed while at the same time
dramatically increasing filtration area. Water must pass through all media before it returns
to the aquarium. Instead of travelling in a direct path through the media, the water current
in the 4 th generation Fluval system is actually directed in a complex flow path. This increases
the time that water is in contact with Fluval's many filtration media modules. The squared
design of the 4 th generation Fluvals provides 35% to 55% increased volume over traditional
round containers while improving the water flow characteristics.
Fluval filters support a greater mass of filter material. This increases the life and efficiency
of the filter system. Maintenance requirements are reduced. General water purity
remains constant.
Conventional filters clog more rapidly and do not function as efficiently as Fluval. Fluval's
multi-leveled media design forces water into many channels and pathways which increases
contact time and thoroughly purifies water. Other filters cannot achieve the same level of
water purity. They cannot successfully increase the flow rate to the levels required to
compensate for the lack of filter media volume and contact time.
Canister filters are placed below the aquarium, to the side or back of the installation. They
do not detract from the beauty of the fish and their surroundings. Fluval filters are ideal for
custom situations where remote access to the filtration unit is required.