Risks Associated With Accessories; Hazards In The Work Environment; Hazards Due To Dust And Vapours - Parkside PDSS 400 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

should not be ignored. The
user should consult a qualified
healthcare professional.
z Risks associated with
accessories
Disconnect machine from the
„ „
power supply before changing
a tool or accessory.
Do not touch collets or acces-
„ „
sories whilst impact driving, as
doing so may increase the risk
of cuts, burns or injuries from
vibration.
Only use accessory and ma-
„ „
terial sizes and types recom-
mended by the manufacturer
for screw joints, do not use
other accessory and material
types and sizes.
Only use impact sockets in
„ „
good working condition as
manual sockets and accesso-
ries in poor working condition
may break and be ejected
when used with impact drivers.
z Hazards in the work en­
vironment
Slipping, tripping and falls
„ „
are main causes of injuries at
the workplace. Be mindful of
surfaces which may have be-
come slippery during machine
use, and of tripping hazards
Safety instructions for air tools
caused by the air- or hydraulic
hose.
Proceed with caution in un-
„ „
familiar surroundings. These
may hold hidden dangers due
to electrical cables or supply
lines.
The machine for screw connec-
„ „
tions is not suitable for use in
explosive environments and is
not insulated against contact
with electrical power sources.
Verify there are no electrical
„ „
lines, gas lines, etc. which
may result in a hazard in the
event they are damaged dur-
ing machine use.
z Hazards due to dust and
vapours
Dusts and vapours generated
„ „
by use of machines for screw
connections may result in dam-
age to the health (e.g. cancer,
birth defects, asthma and / or
dermatitis); it is imperative to
perform a risk assessment for
these hazards and implement
the respective regulatory mech-
anisms.
The risk assessment should in-
„ „
clude dust generated from ma-
chine use and dust in the area
possibly being blown around.
Exhaust air must be dis-
„ „
charged so the amount of dust
GB/MT 55