Original accessories/attachments
■
Use only the additional equipment and acces-
sories specified in the operating instructions.
Using accessories other than those recom-
mended in the operating instructions can lead
to a risk of injury.
Use
Connecting the appliance
■
The product may only be operated using
cleaned, condensate- and oil-free compressed
air and may not exceed the maximum operating
pressure stated in the section entitled "Technical
data" on the appliance.
■
To ensure that you can regulate the air pressure,
the compressed air source should be equipped
with a (filter) pressure reducer.
You will need a flexible compressed air hose with
a quick coupling and a suitable compressed air
source to operate this appliance.
♦
Set the working pressure on the filter pressure
reducer of the compressed air source to the
working pressure stated in the section entitled
"Technical data".
♦
Screw a 1/4" connector nipple
compressed air connection
♦
Slide the connection of the supply hose over
the quick connector of the 1/4" connector
nipple
so that it clicks into place.
│
GB │ MT
■
20
Operating the compressed
air blow-out gun
Switching on
♦
Switching off
♦
Fitting attachments on the
compressed air blow-out gun
♦
Application range of the attachments
The various attachments
for inflating tyres, balls, air mattresses or similar
items. Before installing the attachment, check that it
fits the valve in question.
In addition, the attachments
blow out hard-to-reach areas.
Thread sealant strip
The thread sealant strip
into the
additional seal. To do this, wrap the thread of one
.
of the attachments , for example.
Storage
♦
To switch the compressed air blow-out gun on,
press the trigger
and keep it pressed.
To stop operation, release the trigger
compressed air blow-out gun.
Screw one of the desired attachments
the tool holder
of the compressed air
blow-out gun.
Store compressed air appliances only in dry
rooms.
of the
into
are primarily suitable
can be used to
can be used as an