Klarstein 10030683 Bedienungsanleitung Seite 44

EN
44
To use booster function when hob is working, follows below:
Activate the cooking zone for which you want to use
booster function. Touch the heating zone selection
1
button to select the cooking zone for which you want
to use boost function.
Touch the Booster function button, the heating zone
2 indicator will show "b" and flash for 5 seconds, then
will stop flashing and Booster function is activated.
Notes on using the booster function
1. If the booster function is used for a cooking zone and in addition a second cooking
zone, vertically above or below, is working with a higher power setting than
level 2, then the power setting of this second cooking zone is automatically reduced
to level 2.
2. After the booster function is completed, the cooking zone returns to the original
setting.
Cancel the Booster function
To deactivate the booster function for a cooking zone,
1 touch the corresponding cooking zone button on the
control panel.
Then touch the Booster function button to cancel the
2 Booster function. The power of the corresponding
cooking zone is then reset to the initial setting.
You can also cancel the booster function by setting the
3 heating level for the corresponding cooking zone to 0
using the touch slider.
Flexible Cooking Areas (Induction Hobs)
Some of the models might have one or several flexible cooking areas. These flexible
cooking areas can each be used as a single zone or as two independent zones,
accordingly to the cooking needs anytime.