Power Saving Mode - Toshiba RAV-SM2242DT-E Bedienungsanleitung

Concealed Duct High Static Pressure
6

POWER SAVING MODE

• The power saving mode saves energy by limiting the maximum current which will effect heating or cooling capacity that the
unit can generate.
Push button during operation.
• The air conditioner enters power saving mode.
• appears on the display.
Power saving mode will stay in effect until it is cancelled.
To cancel the power saving mode, push
• disappears.
NOTE
• When other electric appliances are used at the same time, to avoid triggering the circuit breaker, power saving mode is
recommended. Of course you can use power saving mode to save energy as well.
• Power saving mode consumes less energy, but may not heat/cool the room as much as normal mode. (The maximum current
is limited to approximately 75% (factory default) of the normal mode.)
• To adjust the power-save settings, see "Power saving mode" in ADVANCED SETTINGS.
• Even when operation start/stop, operation mode change, or power reset is performed during the power saving mode, the
power saving mode is retained until the next operation.
button again.
– 14 –
Owner's Manual
EN
14-EN