RAVAGLIOLI RAV307H.4WS-VARSC Übersetzung Der Originalanleitung Seite 56

GROUP operating mode
- for a bridge with 4 columns it is possible to only form a group of 2 columns
- for a bridge with 6 columns it is possible to only form a group of 2 or of 4 columns
- for a bridge with 8 columns it is possible to only form a group of 2, 4 or of 6 columns.
- it is not possible to access the group mode if the bridge is in parking,
or if the parking is not correct,
or if the column is moved in single mode (the bridge is not aligned),
NB: the power lift is unable to recognize that the group activated columns belong to the same axis, therefore this manoeuvre is per-
formed under the full responsibility of the operator. It is absolutely forbidden to activate group columns that are not of the same axis.
C) From "ALL" mode to "GROUP" mode
1) the display shows:
H e i g h t 1 1 1 1
the following is displayed:
> > 1 A l l M o d e
2 G r o u p
1 A l l M o d e
> > 2 G r o u p
the following is displayed:
> > G R O U P
E x i t
Selecting the GROUP mode, the following is displayed:
> > G R O U P M O D E
S E L E C T E D . .
If the GROUP mode is not available, the following is displayed:
> > G R O U P M O D E
N O T P O S S I B L E
2) repeat the operations on all the columns that you intend to enter in the group.
After selecting the GROUP function, the following shall appear on the selected columns:
H e i g h t 1 1 1 1
and on the columns excluded from the group:
H e i g h t 1 1 1 1
E S C L U D E D
The Ascent, Descent and Slow Descent commands are only available for the columns in the group; all other columns remain
stationary. The single and parking commands are not available ("CMD NOT POSSIBLE").
This mode allows operations with regard to other columns that make up the power lift only on columns belonging to a group.
These offsets are maintained during any subsequent operations in ALL mode.
56
mm
A L L
Press the black "ENTER" key
< <
M o d e
move down with the blue Key
M o d e < <
confirm with the black "ENTER" key
R E Q ? < <
confirm with the black "ENTER" key
< <
< <
mm
G R O U P
mm
C O L U M N
, to
0526M002-2
7