Compex Energy Mi-READY Bedienungsanleitung Seite 181

- ELECTROMAGNETIC IMMUNITY
Compex Energy is designed for use in the electromagnetic environment stipulated
below. The buyer or user of the Compex Energy must ensure it is used in this
Floors must be wood, concrete or ceramic tiles. If floors are covered with synthetic material, the relative
The quality of the power supply should be that of a typical commercial or hospital environment.
The quality of the power supply should be that of a typical commercial or hospital environment.
The quality of the power supply should be that of a typical commercial or hospital environment.
If the Compex Energy user requires continuous operation during mains power cuts, we recommend
Magnetic fields at the mains frequency should be at the level of a representative
site located in a typical commercial or hospital environment.
NOTE: VT is the AC supply voltage before application of the test
level.
recommended environment.
Electromagnetic
environment - guide
humidity must be maintained at a minimum of 30%.
that the Compex Energy is powered by a UPS or a battery.
179