Epson SureColor series Handbuch Seite 2

Using Pre-treatment
Liquid
Read the safety data sheet before use. You can
download the safety data sheet from the Epson Web
site.
URL: http://www.epson.com
Caution:
O Always wear protective eyewear, gloves, and a mask
when working.
Should any pre-treatment liquid contact your skin
or enter your eyes or mouth, immediately take the
following actions:
O If fluid adheres to your skin, immediately
wash it off using large volumes of soapy water.
Consult a physician if the skin appears irritated
or is discolored.
O If fluid enters your eyes, rinse immediately with
water. Failure to observe this precaution could
result in bloodshot eyes or mild inflammation.
If problems persist, consult a physician.
O If any enters your mouth, consult a physician
immediately.
O If fluid is swallowed, do not force the person
to vomit and consult a physician immediately.
If the person is forced to vomit, fluid may get
caught in the trachea which can be dangerous.
O Store out of the reach of children.
O After work, wash your hands and gargle thoroughly.
– Polyester Pre-treatment Liquid (T43R2) –
Disposal method
Pre-treatment liquid is industrial waste and must be
disposed of by professional waste-disposal contractors
or the like in accord with local regulations. Provide
the contractor with the product safety data sheet when
requesting disposal.
2
c
Important:
O Make sure you are in a well ventilated location
when applying pre-treatment liquid.
O Only prepare as much liquid as necessary for the
current job. If you prepare more than required and
leave it, it may harden.
O Do not store in high or freezing temperatures.
O Avoid direct sunlight. Store at normal room
temperature.
O If pre-treatment liquid gets stuck to the print head,
it could cause the printer to malfunction and print
quality to decline. Make sure that liquid does not
stick to the inside of the printer by accident during
maintenance operations and so on.