Competition Mode (Optional) - Cmp - Dalla Corte dc two Benutzerhandbuch

Competition mode functioning
optional - CMP
This grinder has a second system that allows you to operate it with no serial connection to the machine
and to adjust coffee grinding fineness and time (dose) manually.
Functioning procedures
Pic. 3
Gr.1 and Gr.2 in CMP
◀
CMP
Both grinding units
are in competition
Enabling the CMP mode
To access this mode, switch off the coffee grinder and then switch it back on by keeping the
buttons pushed simultaneously to use both Gr.1 and Gr.2 in CMP mode.
Otherwise, you can switch on the grinder and push the button
to use the CMP mode on Gr.2 only.
If the CMP mode is not enabled, the GCS mode will be on and the serial connection with the machine
maintained.
When the CMP mode is on, in case of interrupted doses you will have to decide if the remaining grinding
time shall be saved in the system memory. This way, if the pouring is interrupted before the end of the
pre-set grinding time, the remaining grinding time will be kept in memory (the interrupted dose button will
blink as a reminder). To delete the remaining grinding time from memory, just push the blinking button.
To exit the CMP mode, repeat the enabling steps.
NOTE
40
Once you are out of the Competiton - CMP mode, you will need to set up the System again
(switch off the grinder, then switch it back on while pushing the
DC-TWO
▶ ◀ ▶
20 20
CMP
Only left grinding unit
is in competition mode
mode
only Gr.1 in CMP
DC-TWO
◀ ▶
21 Ready
CMP GCS
only Gr.2 in CMP
DC-TWO
◀ ▶
Ready 23
GCS CMP
Only right grinding unit
is in competition mode
to use the CMP mode on Gr.1 only or
and buttons).
and