Dalla Corte dc two Benutzerhandbuch Seite 32

1. Password (PW)
Inserendo la PW dello USER, quest'ultimo potrà accedere ad alcuni menù d'impostazione.
La PW di default è 0000.
DC-TWO
1. Password
GCS
When you push the
1.1 - Enter
1.2 - Modify
Use or to select the ENTER item and push
1.1.1 - User
1.1.2 - Service
Use or to select the USER item and push
Enter 0000
To enter the PW, use
You can change the default password through the "1.2 Modify" menu.
To restore the default password, switch off the grinder and switch it back on by pushing the three buttons
.
NOTE
If you enter the wrong password, start over and follow the above-mentioned steps again.
When you have entered the last digit, press
You can scroll the menus list by using
By entering the USER's PW, you can access some set-up menus.
The default PW is 0000.
32
GCS
button, the display will show:
or buttons – when the desired digit is reached, press
or
to enter. The display will show:
to enter. The display will show:
to confirm it and to go back to the menus list.
. Just push for 3 seconds to go back to the main page.
.