What Do You Do In Case Of Operating Malfunctions - Fagor 5H-770 Serie Bedienungsanleitung

9963-6001 ML1 5H-770-775.qxd
W
hat do you do in case of operating
If you have a doubt about the functioning of your oven, this does not
necessarily mean that there is a malfunction. In any event, check the following
items:
Y
ou observe that...
The oven is not heating.
The temperature indicator is
flashing.
The oven light is not working.
The cooling fan continues to
operate after the oven stops.
The pyrolysis cleaning cycle
does not begin.
21/04/05 15:21
malfunctions?
P
ossible causes
• The oven is not connected.
• The fuse in your electrical set-up is
not working.
• The selected temperature is too
low.
• The sensor is defective.
• The oven has experienced
overheating and has engaged safety
steps.
• Defective temperature sensor.
• The light is out of order.
• The oven is not connected or the
fuse is not working.
• The fan should work for a
maximum of one hour after
cooking, or when the oven
temperature is greater than 125°C.
• If it does not stop after one hour.
• The door is not properly closed.
• The locking system is defective.
• The temperature sensor is
defective.
• The contact for "closed door"
detection is defective.
Page 15
W
hat should you do?
- Connect the oven.
- Replace the fuse in your electrical
set-up and check its capacity (16A).
- Increase the selected temperature.
- Call the After-Sales Service.
- Call the After-Sales Service.
- Call the After-Sales Service.
- Replace the light.
- Connect the oven or replace the
fuse.
- Open the oven door to accelerate
the cooling down of the oven.
- Call the After-Sales Service.
- Verify that the door is locked.
- Call the After-Sales Service.
- Call the After-Sales Service.
- Call the After-Sales Service.
EN
15