Panasonic AW-HE100E Installationsanleitung Seite 57

Troubleshooting
 Video
Symptom
No pictures are
displayed or
the pictures are
disturbed
The picture is flipped
vertically
Multiple colour
bands (colour bars)
are displayed
The menu screen is
displayed
No auto focusing
Something is wrong
with the colouring of
the pictures
The pictures are too
light or too dark
Cause and remedial action
 Has the unit been connected properly to the other connected
devices?
 If the system is configured in such a way that the picture is also
switched when the camera to be operated is selected, has the
correct camera been selected?
 Has the video signal setting been selected correctly?
 Has the stand-alone (Desktop) installation setting been selected
correctly?
 Is the automatic picture flipping function now in operation?
 Switch to the camera picture.
 Exit the menu.
 Is the focus set to manual?
 Auto focusing is initiated as soon as the focus is set to auto.
 In some situations, it may be hard to focus at the auto setting.
 In cases like this, select the manual setting, and focus manually.
 Activate the ATW (Auto tracking white adjustment) function.
 In some situations, the proper colours may not be reproduced using
the ATW function.
 In cases like this, proceed with the white balance adjustment.
 Either select the auto setting for the iris or select the manual setting
and adjust the iris manually.
 The pictures may be dark if the video signal cables are too long
because this will cause signal attenuation.
 In cases like this, connect the cable compensator (such as the
AW-RC400).
56 (E)
Reference pages
Installation
Instructions
P.27 to 30
P.17
Installation
Instructions
P.17 to 19
Installation
Instructions
P.20
P.42
P.22
P.39 to 41
P.22
P.24
P.31
P.30
P.24
—