Maintenance; Replacing The Battery; Cleaning; Calibration - Chauvin Arnoux PAC 10 Bedienungsanleitung

5/ MAINTENANCE

For maintenance, use only specified spare parts. The manu-
facturer will not be held responsible for any accident occurring
following a repair done other than by its After Sales Service
or approved repairers.

5.1/ REPLACING THE BATTERY

- Completely disconnect the clamp from the circuit to be measured and
the measurement instrument it is connected to.
- Unscrew the tool release screw holding the cover of the battery
compartment.
- Replace the 9 V battery (type 6LF22, 6LR61 or NEDA 1604).
- Replace the cover of the battery compartment.

5.2/ CLEANING

Keep the jaw faces and mechanism perfectly clean.
The body of the clamp should be cleaned with a cloth moistened with soapy
water.
Rinse with a cloth moistened with clean water.
Never expose the clamp to running water.

5.3/ METROLOGICAL CHECK

Like all measuring or testing devices, the instrument must
be checked regularly.
This instrument should be checked at least once a year. For checking
and calibration, contact one of our accredited metrology laboratories
(information and contact details available on request), at our Chauvin
Arnoux subsidiary or the branch in your country.
5.4/ REPAIRS
For all repairs before or after expiry of warranty, please return the device
to your distributor.
13