Energy Saving Tips; Setting The Temperature - Dometic RM122 Montage- Und Bedienungsanleitung

Using the refrigerator
9.2

Energy saving tips

 Allow hot food to cool down first before you place it into the device.
 Do not open the refrigerator more often than necessary.
 Do not leave the door open for longer than necessary.
 Arrange the food in the refrigerator so that air can circulate inside.
9.3

Setting the temperature

Operating with gas
➤ Set the temperature using the temperature controller (fig. g 2, page 7):
– Position "3" = strong cooling capacity
– Near position "0" = weak cooling capacity
➤ Start the cooling at stage "3" for an hour.
➤ Switch to level "2" or "1" to keep the temperature.
Operating with 230 Vw (RM123 only) or 12 Vg (RM122, RM123)
I
NOTE
After starting the refrigerator it will take about an hour until the ice
tray will show signs of cooling.
The thermostat knob has eight adjustment positions (fig. g, page 7):
➤ Start the cooling at stage "3" or "4".
9.4 Making ice cubes
➤ Fill the ice tray with water to three quarters.
➤ Put the ice tray onto the evaporator (fig. 2 2, page 3) of the refrigerator.
9.5 Setting the door lock
➤ Press the pin down to lock the refrigerator door while driving (fig. i,
page 7).
22
RM122, RM123
EN