Herunterladen Inhalt Inhalt Diese Seite drucken

Troubleshooting - KKT KOLBE EMG601ED Benutzerhandbuch

Vorschau ausblenden Andere Handbücher für EMG601ED:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Troubleshooting

7. Troubleshooting
Problem
Possible cause
The hob does
• No sparks
not ignite
• Pot holder or burner com-
• The gas supply is interrupted.
The hob is dif-
• The gas supply is not fully
ficult to ignite
• Pot holder or burner compo-
• The igniter is soiled with for-
• The burner is wet.
• The openings of the flame
Unknown
• Pot holder or burner compo-
noises
When in use,
• Between pot holders or
flames rise
above the
bottom of the
• A gust of wind has affected
cookware.
Yellow flame
• The openings of the flame
• You're using the wrong gas.
Unstable flame
• Pot holder or burner compo-
54
ponents are not mounted
correctly.
open.
nents are badly mounted.
eign bodies.
generator are soiled.
nents are badly mounted.
burner components there are
ignited foreign bodies.
the flame.
generator are soiled.
nents are badly mounted.
Possible solutions
• Check your power supply.
• Remove the components and
reassemble them.
• Check the gas supply.
• Make sure that the gas tap
is fully open.
• Remove and reassemble the
components.
• Carefully clean the igniter
as described in the correspon-
ding chapter.
• Carefully wipe the burner dry.
• Carefully clean the flame
generator as described in the
corresponding chapter.
• Remove and reassemble the
components.
• Carefully clean the pot holder or
flame generator as described
in the corresponding chapter.
• Check your surroundings for
unfavourable air currents.
• Carefully clean the flame
generator as described in the
corresponding chapter.
• Check the type of gas supply.
• Remove and reassemble the
components.

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Emg601sEmg7515edEmg7515s

Inhaltsverzeichnis