Ikra IPHT2660 Originalbetriebsanleitung Seite 30

EN ENGLISH
MAINTENANCE
MAINTENANCE
Clean the outside of the machine.
Make sure the throttle trigger lock and the throttle
function correctly from a safety point of view.
Check that the engine switch works correctly.
Check that the blades do not move when the engine is
idling.
Check that the blades are undamaged and show no
signs of cracking or other damage. Replace the blades if
necessary.
Check that the blade guard is not damaged or distorted.
Replace the blade guard if it is bent or damaged.
Clean the air filter. Replace if necessary.
Check that nuts and screws are tight.
Check that there are no fuel leaks from the engine, tank
or fuel lines.
Clean the outside of the spark plug. Remove it and check
the electrode gap. Adjust the gap to 0.6-0.7 mm or
replace the spark plug. Check that the spark plug is fitted
with a spark plug cap.
Clean the machine' s cooling system.
Clean the outside of the carburetor and the space around
it.
Grease inside gear box Filling
Check
Blade
(replace if necessary)
Clean the fuel tank.
Check all cables and connections.
Check the clutch, clutch springs and the clutch drum
for wear. Replace if necessary by an authorized service
workshop.
Replace the spark plug. Check that the spark plug is fitted
with a spark plug cap.
To reduce the fire hazard, clean dirt, leaves and surplus
lubricant, etc from the muffler and engine.
Check
Fuel feed line
(replace if necessary)
28
Hours of operation
Before use
every time
10 25
X
X
X
X
X
X
X
X
X
X
after use
50 100
X
X
X
X
X
X
X
X
X
X