Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSIDE OF OVEN
The oven should always be cleaned after
use when it has cooled down.
The cavity should be cleaned using a
mild detergent solution and warm water.
Suitable proprietary chemical cleaners
may be used after first consulting with
the manufacturers recommendations and
testing a small sample of the oven cavity.
Abrasive cleaning agents or scouring pads/
cloths should not be used on the cavity
surface.
NOTE: The manufacturers of this appliance
will accept no responsibility for damage
caused by chemical or abrasive cleaning.
Let the oven cool down and pay special
attention no to touch the hot heating
elements inside the oven cavity.
Fire risk! Do not store flammable
material in the oven
REPLACING THE OVEN LAMP
WARNING: Ensure the appliance is
switched off before replacing the lamp
to avoid the possibility of electric shock.
•
Let the oven cavity and the heating
elements to cool down.
•
Switch off the electrical supply.
•
Remove the protective cover.
•
Unscrew and replace the bulb with a
new one suitable for high temperatures
(300°C)
specifications: 230 or 220-240V, E14
and same power (check watt power
as stamped in the bulb itself) of the
replaced bulb.
•
Refit the protective cover.
Note: Oven bulb replacement is not
covered by your guarantee.
190
having
the
following
Werbung
Inhaltsverzeichnis
