The Dishwashing Results Are Not Satisfactory - hanseatic WQP8-7636R Gebrauchsanleitung

The dishwashing results are not satisfactory

Problem
There are residues or
streaks on the dishes.
The dishes are not
completely clean.
Possible cause
The rinse aid is incorrectly
dosed.
There is no dishwasher salt.
The dishwasher salt is clumpy.
There are food scraps which
are encrusted onto the dishes.
The dishes have not been
stacked optimally.
You have selected the incorrect
dishwashing programme.
The dishwasher detergent is
incorrectly dosed.
The water pressure is too low.
The spraying arm can not ro-
tate unhindered.
The nozzles on the spraying
arm are blocked/calcified.
Troubleshooting table
Solution
Adjust the dispensed dose
(see „Adding rinse aid" on page
EN-12).
Add dishwasher salt (see „Add-
ing dishwasher salt" on page
EN-11).
Stir the dishwasher salt using
the end of a spoon or similar.
Soak dirty dishes prior to wash-
ing the dishes.
Stack the dishes in such a way
that all parts can be reached by
the water jets (see „Loading the
dishwasher" on page EN-14).
Select the correct dishwashing
programme (see „Programme
table" on page EN-18).
Use the correct dosage of dish-
washer detergent (see „Pro-
gramme table" on page EN-18).
Turn the water tap on com-
pletely.
Ensure that no dishes are im-
peding the motion of the spray-
ing arm.
Clean the nozzles (see „Clean-
ing the spraying arm" on page
EN-24).
Page EN-33