Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Operation
(1)
(2)
(3)
(4)
(5)
(11)
(12)
Preparation
Requirements:
– You have read chapter „Safety" starting on
page EN-6 and understand all the safety
notices.
– The appliance is set up and connected as
described in chapter „Installation, connec-
tion and initial commissioning" starting on
page EN-25.
– Dishwasher detergent, rinse aid and dish-
washer salt and multitabs are added.
1. Open the tap completely.
2. Close the dishwasher door.
3. Press the
button (1) to switch on the
dishwasher.
You will hear a signal tone and all LEDs
will illuminate briefly.
After a short time the details of the pro-
gramme
(12) appear on the display.
(6)
(13)
(14)
(24)
Operation
(7)
(15)
(16)
(17)
(18)
(23)
(22)
Signal tones
The appliance sounds a signal tone when
buttons are pressed. This tells you that the
appliance has understood your action.
A signal tone also sounds at the end of the
programme run.
If you pause a programme run for an extend-
ed period, a signal tone sounds to remind
you to continue the programme run.
Display
The display informs you of the current status
before, during and after the programme run.
To save energy the display switches off while
the programme is running. Briefly press the
button (10)
to switch the lighting on again.
Page EN-19
(8)
(9)
(10)
(19)
(20)
(21)
Werbung
Kapitel
Inhaltsverzeichnis
